FujiFilm FinePix F30, Service Manual

Page: 16 / 111

16
2. Disassembly
FinePix F30 Service Manual
1
2
10
11
12
3
5
8
9
4
6
7
2-4. Removing the MAIN PWB ASSY
(1) Remove the SHEET (PWB).
(2) Discharge the main capacitor.
Take care not to touch the main capacitor terminals
before discharging the capacitor.
(3) Unlock the connector and remove the LENS FPC.
(4) Unlock the connector and remove the OPE UNIT
FPC.
(5) Unlock the connector and remove the CCD FPC.
(6) Remove the wire harness (SPEAKER) from the
connector.
(7) Remove the wire harness (MIC) from the connector.
(8) Remove the screw (M1.7 x 3.0).
(9) Remove the 3 screws (M1.7 x 4.0).
(10) Remove the PLATE L.
(11) Open the BATTERY COVER.
(12) Remove the MAIN PWB ASSY in the direction of the
arrow.
[Notes on Assembly]
With the JACK COVER pulled off, fit the MAIN PWB ASSY
and assemble so that the wiring runs between the FLASH
CONST and the MAIN PWB ASSY.
[Assembly]
Assemble by performing the disassembly procedure in
reverse.