3-4
Basic Operation
3
DR-ID1270 Operation Manual 897N120821E
[2] Bed type
CAUTIONS
When inserting the flat panel sensor
to the radiographic examination stand,
direct the exposure plane upwards.
1
Pull out the tray by using the handle.
Tray
2
Pull the cassette stopper, and set the flat
panel sensor so that its center mark is
aligned with the center of the stopper.
Cassette
stopper
Center mark
3
Push the tray back into place by using the
handle after setting the flat panel sensor.
4
Remove the flat panel sensor after use.
Hold the handle and pull out the tray. Remove the
flat panel sensor while pulling the cassette stopper,
and then push the tray back into place.
3.1.5
Changing the Direction of the Flat Panel Sensor Connector
The direction of the connector of the flat panel sensor can be changed, depending on how it is
inserted into the radiographic examination stand.
To change the direction, contact our official dealer or FUJIFILM Representative.
When shipped
After changing the direction
Summary of Contents for FDR ES DR-ID1270
