FujiFilm FDR ES DR-ID1270, Operation Manual

Page: 45 / 76

3-3
Basic Operation
3
DR-ID1270 Operation Manual 897N120821E
[1] Upright type
CAUTIONS
When inserting the flat panel sensor into
the radiographic examination stand, direct
the exposure plane toward the X-ray tube.
1
Pull out the tray.
Tray
2
Insert the flat panel sensor into the cassette
receive with the green mark of the flat panel
sensor up, and then move it downwards.
Cassette receive
Green mark
3
Set the flat panel sensor to the upper part of the tray.
4
Push the tray back into place after setting
the flat panel sensor.
5
Remove the flat panel sensor after use.
Pull out the tray, push the cassette receive
downwards, and then remove the flat panel sensor.
Push the tray back into place.