FujiFilm FDR ES DR-ID1270, Operation Manual

Page: 11 / 76

1-5
For Safe Operation
1
DR-ID1270 Operation Manual 897N120821E
Warnings and Cautions on Network
WARNING
Make sure to use the optional parts and networks recommended by us. Failure to use the
optional parts and networks recommended by us may result in damage to the equipment and/
or electric shock and injury.
CAUTIONS
Connect to the Ethernet Network of 100BASE-TX or 10BASE-T prescribed in the IEEE standard 802.3.
Do not connect telephone lines to LAN connector. Only UTP-type straight LAN cables of 4-pair
Category 5 cable (CAT 5E) or higher are appropriate for connection to this connector.
CAUTIONS
After connecting this system to the network with other systems,confirm that the other systems
are not affected. If they are affected, take countermeasures such as network separation.
System Isolation Instructions
WARNING
To ensure complete system isolation, never install any unauthorized items.
When it is necessary to install authorized optional items, contact our official dealer or FUJIFILM
Representative.
WARNING
Keep the products other than those used for patients out of their reach to ensure appropriate
system isolation.
For details on the products that can be installed in the patient environment, see “2.1.1 System
Configuration”.
WARNING
In normal use, have a patient take a proper positioning for exposure. The operator should operate the
system in a place where safety from radiation is ensured. The operator should also make sure before
exposure that no one but the patient is in the exposure area and the operating area of the system.
Software Precautions
CAUTIONS
Do not install additional software to the system. Do not uninstall any of the software
preinstalled in the system.
The system is preinstalled with the appropriate software. If other software is installed or if the
existing software is uninstalled, various operational errors may result.