FujiFilm FDR ES DR-ID1270, Operation Manual

Page: 22 / 76

1-16
For Safe Operation
1
DR-ID1270 Operation Manual 897N120821E
1.3 Precautions in Using the DR-ID1270
This section describes the precautions in using the DR-ID1270.
1.3.1 Handling
Handle the flat panel sensor carefully since they are
manufactured with precision.
If the flat panel sensor or the SE communication cable is hit or
dropped or is subjected to severe shock, it may be malfunction.
Be aware of dropping the devices could result in injury or
device breakage also may cause injury.
If the front and rear of the flat panel sensor are subject to
impact by a projection, it may be damaged.
Do not apply strong pressure onto the flat panel sensor.
If applied, the flat panel sensor deforms and the waterproof
function may be compromised.
Do not pull the cable of the flat panel sensor (wired
communication mode).
Also, do not pull the flat panel sensor with something caught by
the cable.
Make sure that the cable is not trapped under the wheels of a
stretcher or wheelchair.
In addition, be careful not to catch the cable when using or
storing it.
Otherwise, the cable will be damaged, causing fire, electric
shock or communication failure.
Do not hold the flat panel sensor in one hand when carrying it.
Hold it in both the hands or under the arm.
When carrying or storing the flat panel sensor, remove the
battery pack from it.