manualshive.com logo in svg

FujiFilm CX-400, Owner'S Manual

Share
Download
FujiFilm CX-400 Owner'S Manual Download Page 42

80

Installation on a Mac OS

10

81

Installation on a Mac OS

10

Macintosh

CHECKING THE OS SETTINGS

1

Turn the Macintosh power on and startup the Mac OS.

2

Select the Extensions Manager in the Control Panels and check that the File Exchange
check box is ticked. If not, click in the box so that an 

appears and then restart the

Macintosh.

• Do not connect the printer until software installation is completed.

Note

Enable File Exchange

Check whether File Exchange is active.
To use a memory card supported by the printer, “File Exchange” utility supplied with the Mac OS
must be running.

PRE-INSTALLATION CHECKLIST

Hardware and software requirements (Macintosh)

To run this software, you must have the hardware and software described below. Check your system
before you begin the installation.

• Connect the printer directly to the Macintosh using a USB cable. The software may not operate correctly if an

extension cable or USB hub is used.

• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate

correctly if the connection is faulty.

• When an additional USB interface board is used, operation is not guaranteed.
• Only one CX-400 can be connected to one PC.
• Two or more FUJIFILM printers cannot be connected simultaneously.

Disconnect the USB cable of the printer you do not want to use. (FUJIFILM printers: NX-700/NX-500/NX-800M)

Note

Power Macintosh G3

✽

1

, PowerBook G3

✽

1

Power Macintosh G4, iMac, iBook,

Power Macintosh Cube, PowerBook G4

Mac OS 8.6 to 9.2 

64 MB minimum

✽

2

Amount required for installation . . . .70 MB minimum

Amount required for operation . . . .300 MB minimum

800

×

600 pixels or better, approx. 32,000 colors

Transmission speed 56 kbps minimum (recommended) 

modem connection or ISDN connection

Compatible models

Operating System

RAM

Hard disk space

Display

Internet connection

✽

3

✽

1  Models with a USB port as a standard feature.

✽

2  Turn virtual memory on if necessary.

✽

3  Required to use FinePix Internet Service. The software can still be installed even if you do not

have an Internet connection.

Use the drivers (Mass Storage Driver, printer driver) on the CD-ROM supplied with this
product. When an old driver has already been installed, uninstall it and then install the
driver on the CD-ROM supplied with this product.

Summary of Contents for CX-400






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands