FujiFilm Apeos C3070, Reference Manual

Page: 49 / 58

49
2.8 Setting Restore Tool
ScanAuto Trouble
When detail information for this feature is required upon contacting us, tap on on the left top of
the screen and check the content information from [About].
2.8 Setting Restore Tool
This function is used to backup setting data, etc. in computers connected through networks in case
data is lost due to the machine's storage malfunction.
Download the setting restore tool from our official website.
https://fujifilm.com/fbglobal/eng/support
XXX is already installed. The add-on application cannot be installed because it conflicts with
other add-on applications.
Please install after
deleting XXX Delete the corresponding add-on application.
Message Cause/Remedy
The selected feature is
unavailable. Turn off the multifunction device, make sure that the touch screen is
blank, and then turn on the multifunction device again. If the error still
is not resolved, contact your local representative.
An error has occurred in
the system or in this
feature.
Contact your System
Administrator.
Failed to obtain your email
address.
This feature requires a
successful retrieval of the
user's email address upon
login. For the system administrator, set an e-mail address in [Email Address]
under
> [Device] > [Authentication/Accounting] > [Authentication/
Security Settings] > [Authentication] > [Create/View User Accounts].
You do not have access to
this feature. For the system administrator, cancel the [Scan] restriction in [App
Access] under
> [Device] > [Authentication/Accounting] >
[Authentication/Security Settings] > [Authentication] > [Create/View
User Accounts].
Unable to start.
You have reached your
scan limit.
Contact your System
Administrator. For the system administrator, take one of the following measures:

Reset the scan limit in [Reset Total Impressions] under > [Device]
> [Authentication/Accounting] > [Authentication/Security Settings]
> [Authentication] > [Create/View User Accounts].

Increase the maximum number of allowed pages for the Scan service
in [App Access] under
> [Device] > [Authentication/Accounting]
> [Authentication/Security Settings] > [Authentication] > [Create/
View User Accounts].
Unable to start.
You do not have access to
this feature. For the system administrator, take one of the following measures:

Cancel the [Scan] restriction in [App Access] of the user under >
[Device] > [Authentication/Accounting] > [Authentication/Security
Settings] > [Authentication] > [Create/View User Accounts].

Create the user's account in [Reset Total Impressions] under >
[Device] > [Authentication/Accounting] > [Authentication/Security
Settings] > [Authentication] > [Create/View User Accounts].
Message Measure