FujiFilm Apeos C3070, Reference Manual

Page: 42 / 58

42
2 Appendix
Unable to communicate
(general fax). The machine cannot print received documents when no paper is set.
Paper is jammed. Follow the instructions displayed on the Control
Panel to remove the jammed paper.
The machine cannot receive a fax in the Administrator Mode. Exit the
Administrator Mode.
When a reception password has been set, the machine accepts only
data or polling fax sent with the correct reception password in F code.
The machine is in manual receiving mode. Cancel the manual
reception, or set the fax receiving mode to automatic receiving.
To use the fax information service, set the receiving mode to the
manual receiving mode on the on-hook or off-hook screen, enter an
information code, and then tap [Start].
The document is not loaded correctly on the sender’s machine. Check
the machine condition with the sender.
During communication, errors may be caused by a problem with the
sender’s machine, not just by a problem of the machine.
Symptom Cause/Remedy