FujiFilm Apeos C3070, Reference Manual

Page: 32 / 58

32
2 Appendix
When Adjusting the Fold to the Any Length
You need to enter the value calculated based on measured value and the target value.
The calculating method is the following.
Value to enter (A) = 210 + (“measured value” - “target value”)
Value to enter (B) = “measured value” - “target value”
For example, when adjusting as the shown below, calculate as the following.
Calculation formula
Value to enter (A) = 210 + (“214 (measured value)” - “206 (target value)”) = “218”
Value to enter (B) = “6 (measured value)” - “2 (target value)” = “4”
Note
 The target value A&B can be set within the following range.
Target value C Fold Z Fold Z Fold Half Sheet
A 0 to 2 mm 0 to 2 mm (Paper length/2 - 5) mm to
(Paper length/2) mm
B 0 to 8 mm 0 to 2 mm 0 to 2 mm
206 mm (A) 108 mm 106 mm
420 mm
Target value
("A" Length: 206 mm, "B" Length: 2 mm)
A=206 mm
B=2 mm
214 mm (A) 106 mm 100 mm
420 mm
Measured value
("A" Length: 214 mm, "B" Length: 6 mm)
A=214 mm
B=6 mm