manualshive.com logo in svg

Fuji Xerox DocuPrint CP305 d, User Manual

Share
Download
Fuji Xerox DocuPrint CP305 d User Manual Download Page 237

Troubleshooting

236

024-914

Reload the specified paper on the SSF. 

024-923

Open the side cover. Remove the used yellow cartridge, and install a new cartridge.

024-924

Open the side cover. Remove the used magenta cartridge, and install a new cartridge.

024-925

Open the side cover. Remove the used cyan cartridge, and install a new cartridge.

024-946

Insert the standard 250-sheet tray.

024-947

Insert the optional 250-sheet feeder.

027-446

Change IP address to avoid duplication. Turn off the printer, and turn it on again.

027-452
042-700

Wait for a while until the printer cools down.

071-100

Remove the standard 250-sheet tray and jammed paper. Open and close the front 
cover. 

071-920

Set side 2 of the sheet to the standard 250-sheet tray. 

071-921

Press the   button.

072-100

Remove the optional 250-sheet feeder and jammed paper. Open and close the front 
cover. 

072-101

Remove the standard 250-sheet tray or the optional 250-sheet feeder, and remove the 
jammed paper. Open and close the front cover.

072-215

Turn off the printer. Confirm that the optional 250-sheet feeder is correctly installed, and 
turn on the printer. Contact customer support if this failure is repeated.

072-900

Remove the standard 250-sheet tray or the optional 250-sheet feeder, and remove the 
jammed paper. Open and close the front cover. 

072-920

Set side 2 of the sheet to the optional 250-sheet feeder.

072-921

Press the   button.

075-101

Open the front cover and remove the jammed paper, and then open and close the front 
cover.

075-102

Pull the jammed paper out of the SSF. Open and close the front cover.

075-920

Set side 2 of the sheet to the SSF.

075-922

Remove the paper from the SSF.

075-923

Pull the paper out of the SSF. Reload the paper in the SSF.

077-215

Turn off the printer. Confirm that the duplexer is correctly installed, and turn on the 
printer. Contact customer support if this failure is repeated.

077-300

Close the front cover.

077-301

Close the side cover.

091-912

Remove the ribbon from the drum cartridge. Contact customer support if this failure is 
repeated.

091-916

Open the front cover. Remove the unsupported drum cartridge, and install a supported 
cartridge. 

091-941

Open the side cover. Remove the used yellow cartridge, and install a new cartridge.

091-942

Open the side cover. Remove the used magenta cartridge, and install a new cartridge.

091-943

Open the side cover. Remove the used cyan cartridge, and install a new cartridge.

091-944

Open the side cover. Remove the used black cartridge, and install a new cartridge.

091-972

Open the front cover, and make sure that the drum cartridge is fully installed. 

092-410

Clean the CTD sensor.

092-910
093-912

Open the side cover. Remove the used black cartridge, and install a new cartridge.

Summary of Contents for DocuPrint CP305 d












































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands