28
To make the alarm function invalid
For making the alarm function invalid, then set the upper limit alarm value to “
” and
the lower limit alarm value to “
” for each component and each range.
NO
NO
Note: Use the following hysteresis setting as a reference when setting the hysteresis for the
alarm value.
▲
OFF
Upper limit set value
Setting range of
±
20% max.
ON
▲
OFF
Lower limit set value
Setting range of
±
20% max.
ON
NO
NO
CAL
∧
ENT
NO
NO
Hysteresis setting
Set a hysteresis versus the alarm value.
When CAL key is pressed in the alarm setting status, “
”
will appear on the main indication.
This is the mode for setting the hysteresis for the alarm value.
Change the hysteresis value on the sub indication by pressing
the
key.
The hysteresis is settable in 1% steps in a range of
±
0 to
±
20% versus the measuring range.
The indication changes from
→ → ..............
→
→ →...........
Press the ENT key when the setting is finished.
