7 - 29
INP-TN4PHAV-E
Reference 1: The clock is set to the current time in JAPAN at the time of shipment.
It is backed up by a lithium battery and so continues counting even if there is a power failure
or the power is cut off. (The life of the battery is approximately 10 years (used at a normal
temperature of 25
°
C).
Reference 2: The time is indicated on a 24-hour clock basis. The setting is 00 hours 00 minutes e.g.-23
hours 59 minutes.
Reference 3: Seconds are not displayed. The processing inside the clock is as follows.
When the minutes are set and the ENT key is pressed, a second counter is cleared to 0 and
starts to count.
7.15 Setting the time
Year, Month, Day, Hours, Minutes are displayed in that order going from the left.
The initial setting value is set to JST.
Explanation
Key actuation
Clock is 1 minute slow, (Correction of 35 minutes to 36 minutes)
(example)
Key operation
Explanation
Display
SEL
Press the SEL key several times to display
"Clock".
ENT
Since there is no change in the year, month, day
or hours, press the ENT key to get the 'minutes'
section flashing
Press the
key to set to "36"
ENT
Match the time to the recorded time on the
telephone, etc., and press the ENT key
DATA CLOCK
'90 12/20 11:35
DATA CLOCK
'90 12/20 11:35
DATA CLOCK
'90 12/20 11:36
DATA CLOCK
'90 12/20 11:36
