7 - 20
INP-TN4PHAV-E
Explanation
7.10 Message print specification
• Message print is possible at the occurrence of any events.
• Up to 10 messages, each containing a maximum of 16 characters, can be registered by the user.
• Messages can be specified in numerals, alphabets and other special symbols.
Print colors (orange, red, blue, green, purple, black) and print positions (0 to 150mm) can also be
specified.
• Message print timing can be specified for fixed time at the time of alarm, DI input and recording
start.
(1)
Print color specification
1)
Message print color is selected by
,
keys.
Press the ENT key after selection.
2)
Print color comes in 6 kinds (orange, red, blue, green, purple, black).
3)
When OFF is set in print color, no message is printed.
(2)
Message specification
1)
At the completion of print color specification, the first digit of message flashes. Press the
,
keys to display desired characters, then press the ENT key.
At this time, the second digit flashes. Specify the next desired characters in the same manner.
2)
When '@Y', '@D' and '@T' are specified in message, "year", "month", "day" and "time" are printed
(year is expressed in 3 characters, while month, day and time are expressed in 5 characters).
Example: Specification: @Y _ _
@D _ _ _ _
@T _ _ _ _
Print:
'93
06/09
12:00
3)
When @1 to 9, @A, @B and @C' are specified in message, measured values (7 characters,
without unit) corresponding to Ch1 to 6 are printed.
Example: Specification: Ch _ 1 _
@1
_ _ _ _ mV
Print:
Ch1
– 0 . 0 0 5 mV
4)
When message contains more than 16 characters, up to 16 characters are printed.
ENT
Message No.
Print color
(orange, red, blue, green, purple, black)
Message
Print timing
Print position (0 to 150mm)
Message 1 RED
Print start _ @ T _ _
Print position = 0 mm
Timing Manual
