MHT260a (Engl.)
9-6
ENT (1 [s] or more)
ESC
Alarm code
Alarm detected
(3) Faults with alarm indication
If an alarm is detected, the detected contents are displayed on the keypad panel of amplifier.
If multiple alarms are detected simultaneously, alarm indication is made in accordance with the priority order given below.
Priority order
Display
Description
1
System error
2
Overcurrent, output overcurrent
3
Overspeed
4
Low voltage, undervoltage
5
High voltage, overvoltage
6
Encoder trouble
7
Circuit trouble, amplifier trouble
8
Data error, memory error
9
Fuse brown
10
Combination error
11
Resistor heat 2
12
Encoder communication error
13
Cont (control signal) error
14
Over load, motor overheat
15
Resistor heat, braking (DB) resistor overheat
16
Overflow, deviation excessive
17
Amp heat, amplifier overheat
18
Encoder heat, encoder overheat
19
Absolute data lost
20
Absolute data overflow
21
Terminal error
22
(non)
Remark : An alarm is automatically displayed if detected.
If, at a displayed status, the alarm detection is reset by a control input signal, the initial screen (system para. 89 setting) appears.
The alarm detection can be reset in the test running mode [ ] also.
Holding down the
∧
key and
∨
key simultaneously for at least 1 [s] at a status where an alarm detection is displayed resets the
alarm detection.
Summary of Contents for Faldic-a RYS-R Series
