Fuji Electric Faldic-a RYS-R Series, User Manual

Page: 207 / 291

6-43
MHT260a (Engl.)
The assignable signals are as follows:
1 : Run command [RUN] The run command becomes always valid.
14 : ACC0 Only acceleration time 2 and deceleration time 2 become always valid.
27 : Pulse train ratio 1
28 : Pulse train ratio 2 Pulse train ratio 1 or 2 become always valid. Do not assign these two signals 1 and 2 at the same
time.
29 : P-action P-action is always valid. Assignment is not necessary.
30 : Torque limit Torque limit value becomes always valid. Unless assigned, maximum torque limit value (basic para.
59) setting is valid.
43 : Override valid Override becomes always valid.
44 to 47 : Overeride 1, 2, 4, 8 Only specifically determined magnification becomes valid.
48 : Interrupt input valid Interrupt input becomes always valid.
51 to 53 : [X1], [X2], [X3] Only specifically determined multistep speed becomes valid.
Remarks: The signals that have been assigned to system para. 87 or 88 are always valid.
The only two signals can be always valid.
(16) System parameter 89
!
Basic type, SX bus, T-link
"
(a) Basic type
Para. Name Setting range Initial value Change
89 Initial indication 0 to 20 (in 1 step) 0 Power
(b) SX bus, T-link
Para. Name Setting range Initial value Change
89 Initial indication 0 to 20 (in 1 step) 6 Power
The contents of indication on the keypad panel at power on can be changed.