6-24
MHT260a (Engl.)
(8) Basic parameter 51
Para.
Name
Setting range
Initial value
Change
51
Speed matching zone (width)
10 to Max. speed [r/min] (in 1 step)
50
Always
The speed arrive signal is turned on when the motor speed is near the reference speed (set by para.) As the initial value is 50 [r/min], the
speed arrive signal is on when the motor speed reaches the reference speed
±
50 [r/min].
When the motor speed does not reach the reference speed due to the max. speed setting (basic. para. 16) or override setting, this signal
turns off. When [FWD] or [REV] signal is off, the speed arrive signal does not turn on.
(9) Basic parameter 52
Para.
Name
Setting range
Initial value
Change
52
Speed zero width
10 to max. speed [r/min] (in 1 step)
20
Always
The output range of the speed zero [NZERO] signal can be set. The minimum unit is 1 [r/min].
(10) Basic parameter 53
Para.
Name
Setting range
Initial value
Change
53
Deviation zero width
10 to 10000 [pulse] (in 1 step)
200
Always
The range while the deviation zero signal is on can be set. The setting value is the encoder pulse count.
Speed
Time
Speed matching zone (width)
（
basic para. 51
）
Forward command
［ＦＷＤ］
Speed arrive
［ＮＡＲＶ］
ＯＦＦ
ＯＦＦ
ＯＮ
ＯＦＦ
ＯＮ
ＯＮ
Summary of Contents for Faldic-a RYS-R Series
