41
WRITE
1. Write the command no. value in Write command no. Set values in 16-bit BCD.
2. Write the target value in Write command data. Set values as 32-bit signed binary
values.
3. Turn OFF Request R/W.
4. Confirm Respond to R/W is OFF.
5. Turn ON Request Common area.
6. Confirm Respond to Common area is ON.
7. As the value in Read command data has been changed, confirm value is the same
as the data written in 2. Set values as 32-bit signed binary values.
8. Turn OFF Request Common area.
9. Confirm Respond to Common area is OFF.
