5
Cautions
When conducting any of the following, be sure to remove the power plug or power cable:
Wiring, cabling or connection of DC power, load cells, external input/output
terminals, or terminal block to which to connect CC-Link
Connecting of ground wires
When powering OFF and ON again, be sure to wait 5 or more seconds before powering
on again.
Do not touch the rear panel or connector while the Product is on.
Check signal names when connecting power, frame ground, external input/output
connector or CC-Link connector. Then wire correctly.
Avoid using the Product in the following places:
Near power lines
Where a strong magnetic field exists or occurs
Where noise occurs such as static electricity or relay
Do not install the Product in any of the following environments:
Where temperature or relative humidity exceeds the limit in the
specifications
Where there is a lot of salt or iron content
Where vibration or impact is directly applied
Outdoors or in altitudes exceeding 2,000 meters
Where it receives radiation heat from a heat source
Dusty places
Places subject to extreme temperature changes
Places subject to freezing or dew condensation
Do not continue to use the Product while it is damaged.
Since the Product is open type (built-in equipment), be sure to fix it to a frame or a hard
foundation prior to use.
!
The following items represent situations or conditions where injury to
humans or physical properties is expected.
