55
Control input logic
What is "Control input logic"?
This function allows you to switch over normal open (a contact) and normal close (b
contact) of external input/output terminal No. 14 END signal.
When Standard is set, the Product comes to have the normal open (a contact)
specification and operates with a rising edge.
When Reversed is set, the Product comes to have the normal close (b contact)
specification and operates with a falling edge.
How to set
1. Press MENU key.
2. Use
⋀
⋁
key to select
System Setting
.
3. Press SET key.
4. Use
⋀
⋁
key to select
Control input logic
.
5. Press SET key.
6. Use
⋀
⋁
key to select Standard or Reversed. (default: Standard)
7. Press SET key and confirm the cursor has turned green.
8. Press SET key again to complete this operation.
