47
Select Data Output
What is "Select Data Output"?
IN-100 is fitted with the analog output function. You can select analog output mode.
When
Output Hold Value
is selected, voltage or current values interlinked with the
display value are output in an analogous way.
When
Output Through
is selected, voltage or current values of loads that the load cell
received regardless of the display value are output in an analogous way.
How to set
1. Press MENU key.
2. Use
⋀
⋁
key to select
Condition Setting
.
3. Press SET key.
4. Use
⋀
⋁
key to select
Select Data Output
.
5. Press SET key.
6. Use
⋀
⋁
key to select Output Hold Value or Output Through.
(default: Output Hold Value)
7. Press SET key and confirm the cursor has turned green.
8. Press SET key again to complete this operation.
