Fuji Bikes ROBIN RGX6500, Service Manual

Page: 28 / 48

28
(5) Take off the through bolt of the rotor.
Apply a box wrench on the head of
through bolt. Hit the wrench handle with
a hammer counter-clockwise to loosen.
(6) Put the engine on the work table recoil starter side down.
(7) Use a bolt and oil as a tool for pulling out the rotor in the following procedures:
1. Pour engine oil into the center hole of
rotor shaft.
Fill with oil to the shaft end.
2. Prepare a bolt with the following thread size: M12 x P 1.5
3. Apply a few turns of seal tape around the
tip of the bolt.