Fuji Bikes ROBIN RGX6500, Service Manual

Page: 15 / 48

15
6. CHECKING FUNCTIONAL MEMBERS
6-1 RECEPTACLES
Using a circuit tester, check continuity between the
two terminals at the rear of the receptacles while the
receptacle is mounted on the control panel.
When continuity is found between the output terminals
of the receptacle with a wire connected across these
terminals, the receptacle is normal.
When the wire is removed and no continuity is found
between these terminals, the receptacles are also normal.
6-2 CIRCUIT BREAKER
Check continuity between each of two terminals
at the rear of the circuit breaker while it is mounted
on the control panel.
Normally, there is continuity between each of the two
when the circuit breaker is on while there is no continuity
when the circuit breaker is off.