700-G6-DB- Man Rev. 1 dft5 11 Feb 2021
Page 32/65
6.2.9
DISABLE TRANSMISSIONS
Syntax:
DTX
Access level: USER
Tx State:
Enabled
This command disables transmissions. Normal scheduling of transmissions is suspended.
NOTE:
the transmitter is automatically disabled if configuration parameters are modified
and must be re-enabled with the ETX command to resume transmitting
6.2.10
READ CONFIGURATION
Syntax:
RCFG
Access level: USER
Tx State:
Enabled/Disabled
This command lists all of the configuration parameters. Each parameter is listed in the same format
as if its individual command had been executed.
Example:
RCFG
NESID=326d31d4
TCH=92
The output from the RCFG command can be captured by the host (in a text file) and used to
duplicate the configuration in another unit.
6.2.11
ENABLE TECHNICIAN COMMAND MODE
Syntax:
TECHMODE password
Access level: USER
Tx State:
Enabled/Disabled
This command changes the command access level to TECHNICIAN. The access level will not change
unless the password is correct.
6.2.12
ENABLE USER COMMAND MODE
Syntax:
USERMODE
Access level: USER
Tx State:
Enabled/Disabled
This command changes the command access level back to USER. No password is required. A power
cycle of the transmitter will also return the command access level to USER.
