700-G6-DB- Man Rev. 1 dft5 11 Feb 2021
Page 18/65
5.7
ADDITIONAL TRANSMIT PARAMETERS
The rest of the parameters are optional: some are user defined, some need to remain in the factory
default, and others require further permissions from the NOAA. The following table briefly explains
each item. Detailed explanations are found in Chapter 10.
Default
setting
Item
Command
and
Response
Example
Comments
CMSG=N
Center message
in window
>CMSG=Y
>OK
Y=Yes (Recommended). N=No. See Section
9.7.1 for details.
EBM=N
Empty buffer
message
>EBM=Y
>OK
Y=Yes. The
G6-DB
transmitter will transmit
even if there is no data in the transmit
buffer.
N=No. There will be no transmission if there
is no data in the buffer.
TPR=S
Transmit
preamble length
N/A
N/A= Do not alter. Default setting.
TDF=A
Transmit data
format.
Default
Default setting is A (ASCII). Other options are
pseudo binary (P) and binary (B). See section
10.3.9 for details.
RCH=0
Random channel
Default
N/A= Do not alter. The transmitter does not
transmit random messages. Keep default
settings. .
RBR=0
Random Baud rate
Default
RIN=0
Random interval
Default
RPC=0
Random Tx
random
percentage
Default
RRC=0
Random Tx
repeat count
Default
RDF=A
Random Tx
data format
Default
RMC=N
Random Tx
message counter
Default
IRC=?
ASCII
Replacement
character.
Default
See section 6.2.4 for details.
GIN=00:00:00
GPS Fix interval
Default
See section 6.2.13
for details.
Table 2: Additional transmit parameters
