FSP HySpirit series User Manual
11
http://www.fsp-group.com.tw/en/product/PVInverter.html
Recommended Panel Configuration
Solar Panel Spec.
(reference)
- 260Wp
- Vmp: 30.7Vdc
- Imp: 9.18A
- Voc: 38.9Vdc
- Isc: 8.56A
- Cells: 60
SOLAR INPUT 1
SOLAR INPUT 2
Q'ty of
panels
Total Input
Power
(Min in serial: 6pcs;
Max. in serial: 12pcs)
6pcs in serial
x
6pcs
1,560W
x
6pcs in serial
6pcs
1,560W
8pcs in serial
x
8pcs
2,080W
x
8pcs in serial
8pcs
2,080W
6pcs in serial
6pcs in serial
12pcs
3,120W
7pcs in serial
7pcs in serial
14pcs
3,640W
8pcs in serial
8pcs in serial
16pcs
4,160W
10pcs in serial
10pcs in serial
20pcs
5,200W
12pcs in serial
12pcs in serial
24pcs
6,240W
8.
Battery Connection
CAUTION: Before connecting to batteries, please separately install a DC circuit breaker between
inverter and batteries.
NOTE1: Please only use sealed lead acid battery, vented and Gel battery. Please check its
maximum charging voltage and current when first using this inverter. If using Lithium iron or Nicd
battery, please consult with installer for the details.
NOTE2: Please use 80Vdc/200A circuit breaker.
NOTE3: The overvoltage category of the battery input is II.
Please follow the steps below to implement battery connection:
Step 1: Check the nominal voltage of batteries. The nominal input
voltage for inverter is 48Vdc.
Step 2: Use two battery cables. Remove insulation sleeve 12 mm and
insert conductor into cable ring terminal. Refer to the right diagram.
Step 3: Remove the cover of battery and follow the polarity of battery printed near the battery
terminal! Place the external battery cable ring terminal over the battery terminal.
RED cable to the positive terminal (+);
BLACK cable to the negative terminal (-).
CAUTION: Do NOT touch the inverter to avoid electric shock. When PV modules are
exposed to sunlight, it may generate DC voltage in the inverter.