FSC A320 SIDESTICK PRO OEM Instructor User Manual Download Page 212

Page: 212 / 329

A320 Neo Instructor Operating Station
Instructor User Guide

Control Board Footer

13 Oct 2017
Page 178

11.2.6.1.16

Tire Pressure

Tap this button to reset the tire pressure to normal and the brake temperature to the
ambient temperature.

This button is disabled when tire pressure is within the normal operating range and
the brake temperature is at ambient temperature.

Tapping this button causes it to illuminate for two seconds.

11.2.6.1.17

Brake Temp

Tap this button to reset the brake temperature to the ambient temperature.

This button is disabled when the brake temperature is at ambient temperature.

Tapping this button causes it to illuminate for two seconds.

11.2.6.1.18

Electrics

Tap this button to reset the following elements to normal:

•

Recharge Batteries

•

IDG Connect

•

IDG Oil

•

Stow RAT

This button is disabled when all above items are reset to normal.

Tapping this button causes it to illuminate for two seconds.

11.2.6.1.19 Recharge Batteries

Tap this button to recharge batteries.

This button is disabled when all batteries are charged.

Tapping this button causes it to illuminate for two seconds.

11.2.6.1.20 IDG

Connect

Tap this button to reset the disconnected IDGs. This button is disabled when the IDG
is connected. Tapping this button causes it to illuminate for two seconds.

Summary of Contents for A320 SIDESTICK PRO OEM










































































































































































































































































































































Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands

FSC A320 SIDESTICK PRO OEM, Instructor User Manual

Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands