FSC A320 SIDESTICK PRO OEM Instructor User Manual Download Page 127

Page: 127 / 329

Instructor User Guide

AIRCRAFT Tab

AIRCRAFT Tab

13 Oct 2017

Page 93

8.15

MALFUNCTIONS Section

The MALFUNCTIONS Section provides a summary of all active and/or armed
malfunctions.

In this section, the instructor can:

•

Clear an active or armed malfunction as well as activate an armed malfunction.

•

Scroll through when there are more than four malfunctions active or armed.

Figure 51 AIRCRAFT Tab

– MALFUNCTIONS Section

8.15.1

Activate

Tap this button to activate the armed malfunction.

8.15.2

Clear

Tap this button to deactivate and clear the selected malfunction.

8.15.3

Clear All

Tap this button to deactivate and clear all armed or active malfunctions.

8.15.4

Tap to Add

Tap this button to open the MALFUNCTIONS sliding panel and add a new
malfunction to the simulation.

Summary of Contents for A320 SIDESTICK PRO OEM










































































































































































































































































































































Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands

FSC A320 SIDESTICK PRO OEM, Instructor User Manual

Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands