FS TAP Series, Reference Manual

Page: 56 / 340

TAP Series Switch Command Line Reference
56
Default
None
Usage
Wildcard bits in this command are used as reversed. That means value and wildcard bits have
same length, If a bit in wildcard is 0 means this bit needs to check, otherwise this bit should
be ignored.
E.g.: ip address 10.10.10.0 wildcard 0.0.0.255 means 256 ip addresses from 10.10.10.0 to
10.10.10.255.
Layer 4 information
（
e.g. tcp/udp port
）
and fragment information are exclusive.
Notice:
This command does not supported on CTC5160 (GreatBelt) based switch.
Examples
This example shows how to add an inner-match filter with sequence number 10 to im1:
Switch(config)# inner-match im1
Switch(config-inner-match-im1)# sequence-num 10 match icmp src-ip 10.10.10.0 0.0.0.255 dst-ip
any
Related Commands
no sequence-num