FS TAP Series, Reference Manual

Page: 33 / 340

TAP Series Switch Command Line Reference
33
NAME_STRING Remark string for the flow, which should
begin with a-z/A-Z/0-9, valid characters are
0-9A-Za-z.-, and maximum length is 100
characters.
Command Mode
Flow Configuration
Default
There is no remark of flow by default.
Usage
Use this command to add remarks for the flow.
Use the no form of this command to delete the remarks.
The remark string length is up to 100 characters. The exceed parts will not be stored and will
be truncated.
Examples
This example shows how to add a remark to describe the flow:
Switch(config-flow-f1)# remark flow1ipdeny
This example shows how to delete the remark of the flow.
Switch(config-flow-f1)# no remark
Related Commands
show flow
2.6
no sequence-num
Use this command to delete a filter from flow.