FS TAP Series, Reference Manual

Page: 48 / 340

TAP Series Switch Command Line Reference
48
Switch# show inner-match
inner-match im1
sequence-num 1 match icmp src-ip any dst-ip any vlan any
inner-match im2
sequence-num 1 match udp dst-port eq 4758 src-ip any dst-ip host 2.2.2.2
Related Commands
inner-match
3.2 inner-match
Use this command to create inner-match and then enter Inner-match configuration mode.
Use the no form of this command to delete the inner-match.
Command Syntax
inner-match INNER_MATCH_NAME
no inner-match INNER_MATCH_NAME
NAME_STRING Specify an inner-match name to create and
enter the mode.
The inner match name should begin with a-
z/A-Z/0-9, valid characters are 0-9A-Za-z.-,
and maximum length is 20 characters.
Command Mode
Global Configuration
Default
None
Usage
If the system already has an inner-match with the same name, this command will enter the
inner-match configuration mode.