i
FQG30-T™ GAS WARRANTY STATEMENT
Frymaster, L.L.C. makes the following limited warranties to the original purchaser only for
this equipment and replacement parts:
A. WARRANTY PROVISIONS - FRYERS
1. Frymaster L.L.C. warrants all components against defects in material and
workmanship for a period of two years.
2. All parts, with the exception of the frypot, O-rings and fuses, are warranted for two
years after installation date of fryer.
3. If any parts, except fuses and filter O-rings, become defective during the first year
after installation date, Frymaster will also pay straight-time labor costs up to two
hours to replace the part, plus up to 100 miles/160 km of travel (50 miles/80 km
each way).
B. WARRANTY PROVISIONS - FRYPOTS
1.
Frymaster warrants the frypot assembly for fifteen (15) years. First ten (10) years
parts and labor. Years eleven (11) through fifteen (15) frypot only. Components
attached to the frypot, such as the high-limit, probe, gaskets, seals, ignitors and
related fasteners, are also covered by the fifteen year warranty if replacement is
necessitated by the frypot replacement. Components that are not part of the frypot
assembly, such as the blower, gas valve, micro switches, doors and cabinetry are
not covered by the frypot warranty. Leaks due to abuse or from threaded fittings
such as probes, sensors, high-limits, drain valves or return piping are not included.
If the frypot is found to be defective, Frymaster will replace the frypot, allowing up
to the maximum time per the Frymaster time allowance chart hours of straight-time
labor plus up to 100 miles/160 km of travel (50 miles/80 km each way) to change the
frypot.
2.
This warranty is limited to fryers operating on natural or propane (LP) gas. Fryers
that operate on manufactured gas (also known as town gas or high-hydrogen gas)
have a lifetime frypot warranty, parts only.
C. WARRANTY PROVISIONS – COMBUSTION CHAMBERS
1.
Frymaster L.L.C. warrants the combustion chambers against defective material or
workmanship for a period of ten years from the original installation date, parts and
labor.
2.
The combustion chamber consists of the infrared burners and the structural
components to mount the burners. This warranty does not cover ancillary
components, including the igniter, blower, high-limit thermostat, and temperature
probe.