PRIVATE AND CONFIDENTIAL © 2020 FRTEK CO., LTD.
43
PrimAer 28GHz
Operating Manual
Figure 20. SU Pole Installation Assemble
Above picture is an assembly drawing of the SU pole installation. Assembly order is shown below.
1. Totally unscrew M6 Torx Sems Screw (2ea) of "B" to separate Wall Mount Bracket from the DU.
(Unscrew M6 Torx Sems Screw (2ea) of "A" only enough for the Wall Mount Bracket to be separated)
2. Use M6 Torx Sems Screw (4ea) to assemble the Wall Mount Bracket and Pole Mount Bracket.
3. Use + driver to assemble the Bracket and SUS Band (4ea) on the pole.
Place the SU according to the "Guide & Fixing Groove" picture. (Pole diameter can apply from 3~14")
SUS band should be assembled as shown below.
4. Screw back the M6 Torx Sems Screw (2ea) of "B" and re-screw the M6 Torx Sems Screw (2ea) of
"A".
