Analog Inputs
Wire feed speed
command value
(Wire speed set
value) - Group
Input / Analog
Input
As described below, the set value can be specified on a Digital Interface or an Analog
Interface.
The following set value specifications apply to the MIG/MAG standard synergic,
MIG/MAG pulse synergic, MIG/MAG PMC, and MIG/MAG LSC welding processes.
Digital Interface:
The wirefeeder set value is specified by entering a value between -32,768 and
+32,767 (SINT 16).
Value range
Designation
Min./max. possible value
-32,768
Wire speed
-327.68 m/min (depending on wirefeeder)
+32,767
Wire speed
+327.67 m/min (depending on wirefeeder)
Additional information for TWIN systems:
The digital set value must be entered separately for both power sources.
Analog Interface:
The wirefeeder set value is specified through an analog method by entering a value
between 0 and 10 V.
Value range
Designation
Min./max. possible value
0 V
Wire speed
0% (depending on wirefeeder)
10 V
Wire speed
100% (depending on wirefeeder)
Additional information for TWIN systems:
It is not possible to enter an analog set value on TWIN systems.
Job correction (specifications apply for Single- andTWIN welding):
-
Factor = 100
-
Data type SINT
-
Specified as a percentage. Example: 15% = 1500 step change
Arclength correc-
tion (arc length
correction) -
Group Input /
Analog Input
As described below, the value for the arc length correction can be specified on a Digital
Interface or an Analog Interface.
The following specifications apply to the MIG/MAG standard synergic, MIG/MAG pulse
synergic, MIG/MAG PMC, and MIG/MAG LSC welding processes.
Digital Interface:
By entering a value between -32,768 and +32,767 (SINT 16) the arc length is correc-
ted, but the wire speed is not changed.
Value range
Designation
Min./max. possible value
-32,768
Arc length correction
-10% = shorter arc
0
Arc length correction
0% = saved value
+32,767
Arc length correction
+10% = longer arc
Additional information for TWIN systems:
The digital set value must be entered separately for both power sources.
20
