Limit Monitoring - details on the individual welding
parameters
Voltage monitor-
ing
Serves to:
-
Set the voltage set value and the desired limits
-
Monitor the voltage actual value per weld seam / job
Voltage monitoring
Adjustable parameters:
(1)
Voltage set value:
0 to 100 V
(2)
Lower voltage limit:
-10 to 0 V
(3)
Upper voltage limit:
0 to 10 V
(4)
Time limit for the reaction of Limit Monitoring:
Off / 0 to 10 seconds
Explanation for setting from 0 to 10 seconds:
-
If, for example, 5 seconds are set, Limit Monitoring will only react after a limit
has been exceeded or undershot continuously for 5 seconds
Explanation for "Off" setting:
-
Limit Monitoring is disabled for this welding parameter
-
There is no display of limit overruns
Possible error messages during voltage monitoring:
19 |
Lower voltage limit undershot
20 |
Upper voltage limit exceeded
67
EN-US
