Fronius TPS/i Robotics TWIN Push, Operating Instructions Manual

Page: 43 / 108

43
EN
-U
S
TWIN Characteristics
General Only PMC TWIN characteristics with the following properties are available for the TWIN
welding process:
- Universal
- Multi arc
- PCS
The same TWIN characteristic must be selected on both process lines.
Prerequisites for using a PMC TWIN characteristic:
- Pulse welding package on both power sources
- Both power sources must be connected to the TWIN Controller.
Available TWIN
characteristics
No. Material Wire diame -
ter
Protective gas shield Property
3564 Steel 1.2 mm M21 Ar + 15-20% CO
2
TWIN universal
3565 Steel 1.2 mm M20 Ar + 8-10% CO
2
TWIN universal
3734 Steel 1.6 mm M21 Ar + 15-20% CO
2
TWIN universal
3735 Steel 1.6 mm M20 Ar + 8-10% CO
2
TWIN universal
3833 Steel 1.2 mm M21 Ar + 15-20% CO
2
TWIN PCS
3834 Steel 1.2 mm M20 Ar + 8-10% CO
2
TWIN PCS
3837 Steel 1.2 mm M21 Ar + 15-20% CO
2
TWIN multi arc
3838 Steel 1.2 mm M20 Ar + 8-10% CO
2
TWIN multi arc
3840 Steel 1.6 mm M21 Ar + 15-20% CO
2
TWIN PCS
3841 Steel 1.6 mm M20 Ar + 8-10% CO
2
TWIN PCS
3845 Steel 1.4 mm M21 Ar + 15-20% CO
2
TWIN universal
3846 Steel 1.4 mm M21 Ar + 15-20% CO
2
TWIN PCS
3892 Steel 1.3 mm M20 Ar + 8-10% CO
2
TWIN universal
3893 Steel 1.3 mm M20 Ar + 8-10% CO
2
TWIN PCS
3894 MC * 1.2 mm M20 Ar + 8-10% CO
2
TWIN universal
3896 MC * 1.2 mm M20 Ar + 8-10% CO
2
TWIN PCS
3897 MC * 1.6 mm M20 Ar + 8-10% CO
2
TWIN universal
3901 MC * 1.6 mm M20 Ar + 8-10% CO
2
TWIN PCS
3903 MC * 1.2 mm M21 Ar + 15-20% CO
2
TWIN universal
3904 MC * 1.2 mm M21 Ar + 15-20% CO
2
TWIN PCS
3905 MC * 1.6 mm M21 Ar + 15-20% CO
2
TWIN universal
3906 MC * 1.6 mm M21 Ar + 15-20% CO
2
TWIN PCS
* MC = Metal Cored (flux core wire)