113
Fitting the FPA15
board
(continued)
- Plug the 10-pole Molex plug (41) onto
board LCA15
- Plug the 2-pole Molex plug (40) onto
board LCA15
- Arrange the ribbon cable (42) above
the cable harness, as shown in Fig.15
- Plug the ribbon cable (42) to board
FPA15 (5)
- Plug the “housing earth conductor” (36)
onto the housing box, in the correct
position
- Replace the housing box
- Screw the 5x25-TX20 screw (35) back
onto the rear of the housing
- Screw the 5x25-TX20 screw (34) back
onto the front of the housing
- Fit the carrying strap back on again
- Insert the board insulator (37)
- Insert the housing stiffening element
(21)
Closing the
housing
Fig.24
(40)
(41)
(42)
(5)
(34)
(36)
(35)
Fig.26
(21)
(37)
Fig.25
Summary of Contents for TP 1500
Page 1: ...1 Service Manual...
Page 53: ...53 Overall circuit diagram...
Page 54: ...54...
Page 114: ...114...
