Fronius Symo GEN24 3.0, Operating Instructions Manual, Page: 109 / 144

1
Loosen the two screws on the underside
of the housing cover by rotating them 180°
to the left using a screwdriver (TX20).
Then lift the housing cover away from the
inverter at the bottom and detach from
above.
2
Loosen the five screws of the connection
area cover by rotating them 180° to the left
using a screwdriver (TX20).
Remove the connection area cover from
the device.
3
Remove the connection area divider by
pressing the snap tabs.
109
EN