6
General
Utilisation for in
-
tended purpose
only
Environmental
conditions
The device is manufactured using state-of-the-art technology and according
to recognised safety standards. If used incorrectly or misused, however, it
can cause:
-
injury or death to the operator or a third party,
-
damage to the device and other material assets belonging to the oper
-
ating company,
-
inefficient operation of the device.
All persons involved in commissioning, operating, maintaining and servicing
the device must:
-
be suitably qualified,
-
read and follow these operating instructions carefully.
The operating instructions must always be at hand wherever the device is
being used. In addition to the operating instructions, attention must also be
paid to any generally applicable and local regulations regarding accident pre
-
vention and environmental protection.
All safety and danger notices on the device
-
must be in a legible state,
-
must not be damaged,
-
must not be removed,
-
must not be covered, pasted or painted over.
Before switching on the device, rectify any faults that could compromise
safety.
This is for your personal safety!
The machine may only be used for jobs as defined by the “Intended pur
-
pose”.
Utilisation for any other purpose, or in any other manner, shall be deemed to
be "not in accordance with the intended purpose". The manufacturer shall
not be liable for any damage resulting from such improper use.
Utilisation in accordance with the “intended purpose” also comprises
-
complete reading and following of all the instructions given in this man
-
ual
-
complete reading and following of all the safety instructions and danger
warnings
-
performing all stipulated inspection and servicing work.
The machine is designed to be used in industrial and workshop environ
-
ments. The manufacturer shall not be liable for any damage resulting from
use of the machine in residential premises.
Likewise Fronius will accept no liability for defective or faulty work results.
Operation or storage of the device outside the stipulated area will be deemed
as not in accordance with the intended purpose. The manufacturer shall not
be held liable for any damage arising from such usage.
Ambient temperature range:
-
during operation: -10 °C to + 40 °C (14 °F to 104 °F)
-
during transport and storage: -20 °C to +55 °C (-4 °F to 131 °F)
