24
Start-up
CAUTION!
Danger from current flow.
Danger of damage to workpiece and cleaning electrode because of current flow.
► As soon as the mains cable of the MagicCleaner is connected to the mains, cleaning
current may be flowing, if the program switch is positioned accordingly.
► Deposit handle on insulated surface!
Connect up the MagicCleaner to the mains
Select the Printing mode with the program switch (2)
Select the cleaning current on dial (1) and set the electrolyte dispensing rate to maxi
-
mum on dial (5
Fix the printing film to the workpiece with adhesive tape
Printing proce
-
dure
Push the button on the handle to ensure that the printing felt is sufficiently wetted with
electrolyte.
–
The first time after the reservoir has been (re)filled, it takes the electrolyte approx.
30 sec to be pumped from the reservoir to the handle.
Applying gentle pressure, slowly move the cleaning electrode across the film, 1 - 3
times
–
If the cleaning electrode touches the workpiece off the edge of the film, this caus
-
es black marks on the workpiece!
IMPORTANT!
When you have finished printing, rinse the printing film thoroughly in water
(if the printing electrolyte dries onto the film, this may lead to poor-quality printing results)!
1
2
3
4
1
2
