26
Start-up
CAUTION!
Danger from current flow.
Danger of damage to workpiece and cleaning electrode because of current flow.
► As soon as the mains cable of the MagicCleaner is connected to the mains, cleaning
current may be flowing, if the program switch is positioned accordingly.
► Deposit handle on insulated surface!
Connect up the MagicCleaner to the mains
Select the “Printing“ mode with the program switch (2)
Set the cleaning current to maximum on dial (1) and the electrolyte dispensing rate to
minimum on dial (5)
Fix the printing film to the workpiece with adhesive plastic tape
Printing proce
-
dure
Dip the cleaning electrode, with the mounted printing felt, into the printing electrolyte
until the felt is well wetted.
Applying gentle pressure, slowly move the cleaning electrode across the film, 1 - 3
times
–
If the cleaning electrode touches the workpiece off the edge of the film, this caus
-
es black marks on the workpiece!
IMPORTANT!
When you have finished printing, rinse the printing film thoroughly in water
(if the printing electrolyte dries onto the film, this may lead to poor-quality printing results)!
1
2
3
4
5
6
