Fronius IG-TL 3.0, Operating Instructions Manual

Page: 71 / 140

69
Display values in
the ‘TODAY’ /
‘YEAR’ / ‘TOTAL’
display modes
Output Energy
energy fed into the grid over a given period of time
(kWh / MWh)
Press the ‘Enter’ key to display the daily charac-
teristic curve (only in the ‘Today’ display mode).
Daily Characteristic Curve
graphically represents the course of the output
power during the day. The time axis is automati-
cally scaled.
Press the ‘Back’ key to close the display.
Due to the variety of different monitoring systems, there can be deviations between the
readings of other metering instruments and the readings from the inverter. For determin-
ing the energy supplied to the grid, only the readings of the calibrated meter supplied by
the electric utility company are relevant.
Yield
Amount of money earned during the period of time
in question (currency can be selected in the Setup
menu)
As was the case for the output energy, readings may differ from those of other instru-
ments.
‘The Setup menu’ section describes how to set the currency and rate for the energy sup-
plied. The factory setting depends on the respective country-specific setup.
CO
2
Savings
CO
2
emission (g / kg) saved during the period
monitored
The CO
2
meter gives an indication of CO
2
emissions that would be released during the
generation of the same amount of electricity depending on the available power plant.
The factory setting is 0.59 kg / kWh (source: DGS - German Society for Solar Energy).
Maximum Output Power
highest output power during observation period
(W)