Fronius IG-TL 3.0, Operating Instructions Manual

Page: 54 / 140

52
USB stick for up-
dating inverter
software End customers can also use the USB stick to update the inverter software: The update file
is first saved to the USB stick and then transferred to the inverter.
For more information about updating inverter software using a USB stick, please see the
section ‘Setting and Displaying Menu Items’ in the chapter ‘Operation.’
The inverter software can be updated through a data logger or a Fronius SmartConverter
(= through a PC/ laptop connection) in conjunction with the Fronius solar.update Software
(see ‘Fronius Solar.update’ operating instructions.)
Removing the
USB stick
USB symbol on the inverter display, e.g.,
in the ‘NOW’ display mode
When the inverter recognizes a USB stick,
the USB symbol will appear at the top right
of the display.
When inserting the USB stick, make sure
that the USB symbol is displayed (it may
also be flashing).
NOTE! Please be aware that in outdoor applications the USB stick may only func-
tion in a limited temperature range. Make sure, for example, that the USB stick
will also function at low temperatures for outdoor applications.
Safety information for removing a USB
stick
IMPORTANT To prevent the loss of data,
the connected USB stick should only be
removed under the following conditions:
-
Only via the Setup menu, ‘USB / Dis-
connect Device’ menu item
- When the ‘Data Transfer’ LED is no
longer flashing or lit
Do not
disconnect
while LED is
flashing.