Fronius IG-TL 3.0 Operating Instructions Manual Download Page 65

Page: 65 / 140

Navigation in the Menu Level

Activating display
illumination

Press any key.

The display illumination is activated.

The Setup menu also offers a choice between a permanently lit or permanently dark
display.

Automatic deacti-
vation of display
illumination /
Switching to the
‘NOW’ display
mode

If no key is pressed for 2 minutes,
-

the display illumination turns off automatically and the inverter switches to the ‘NOW’
display mode (if the display illumination is set to automatic).

The inverter switches to the ‘NOW’ display mode from anywhere within the display
modes or the Setup menu except for the ‘Standby’ menu item.

the current output power is displayed

Accessing the
menu level

Press the ‘Menu’ key.

‘Menu’ appears on the display.

The inverter is now at the menu level.

From the menu level you can
-

Set the desired display mode

Access the Setup menu

Summary of Contents for IG-TL 3.0













































































































































Search results

Summary of Contents for IG-TL 3.0

Reviews:

Brands by name

Popular brands

Fronius IG-TL 3.0, Operating Instructions Manual

Search results

Summary of Contents for IG-TL 3.0

Reviews:

Brands by name

Popular brands