Fronius IG 2000, Operating Instructions Manual

Page: 5 / 116

3
EN-US
General These operating instructions contain important instructions that must be followed during in-
stallation and maintenance of the inverter.
The inverter is designed and tested according to international safety requirements, but as
with all electrical and electronic equipment, certain precautions must be observed when in-
stalling and/or operating the inverter.
To reduce the risk of personal injury and to ensure the safe installation and operation of
the inverter, you must carefully read and follow all instructions and safety instructions in
these operating instructions.
Failure to follow these instructions and other relevant safety procedures may result in void-
ing of the warranty and/or damage to the inverter or other property.
Safety instruc-
tions The following section "Safety instructions" contains various warnings. A Warning describes
a hazard to equipment or personnel. It calls attention to a procedure or practice, which, if
not correctly performed or adhered to, could result in damage to or destruction of part or
all of the inverter and/or other equipment connected to the inverter or personal injury.
Electrical installa-
tions All electrical installations must be carried out in accordance with the National Electrical
Code, ANSI/NFPA 70, and any other codes and regulations applicable to the installation
site.
For installations in Canada, the installations must be done in accordance with applicable
Canadian standards.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS