Fronius 10.0-3 480, Service Manual, Page: 91 / 180

91
EN
Foreword and safety instructions
Safety
Protective meas-
ures against ESD
Fronius Technical
Support Please contact your national Fronius Technical Support team with any fault analysis que-
ries.
Ordering spare
parts Please contact your national Fronius Technical Support team to order spare parts or to
consult on fault analysis queries.
General The service manual can be obtained from the DownloadCenter at "downloadcenter.froni-
us.com".
Each chapter in the service manual deals with one complete topic. Use each chapter as a
self-contained source of information. A short description of each chapter follows.
Tools and meas-
uring devices This provides an overview and description of all equipment required for servicing the de-
vice professionally. This equipment includes:
-
Tools required
- Measuring and testing equipment
- Ancillary materials
WARNING! Work that is carried out incorrectly can cause serious injury and dam-
age. All activities described in the service manual must only be carried out by Fro-
nius-trained service technicians. Take note of the "Safety rules" section in the
inverter operating instructions.
WARNING! An electric shock can be fatal. Before opening the device:
- Move the mains switch to the O position
- Unplug the device from the mains
- Put up an easy-to-understand warning sign to stop anybody inadvertently
switching it back on again
- Using a suitable measuring instrument, check to make sure that electrically
charged components (e.g. capacitors) have been discharged.
WARNING! An electric shock can be fatal. If the device needs to be switched on
briefly for testing while the housing is open:
-
Do not touch any parts inside the housing
- Only touch using suitable measuring or test probes
WARNING! An inadequate ground conductor connection can cause serious inju-
ry or damage. The housing screws provide a suitable ground conductor connec-
tion for earthing (grounding) the housing and must NOT be replaced by any other
screws which do not provide a reliable ground conductor connection.
Danger of damage to electrical components from electrical discharge. Suitable
measures should be taken to protect against ESD when replacing and install-
ing components.