Fronius 10.0-3 480, Service Manual, Page: 123 / 180

123
EN
Fit the power stage set cover with six
5x18 TX25 screws and seal rings (4)
[3 Nm]
Attach the inverter at the top and allow
it to engage in the wall bracket
Fit the two 5x25 TX25 screws (3) to
hold the inverter securely in the wall
bracket
[2.5 Nm]
If applicable, connect all plug connec-
tions
Fit the Datcom cover with four 5x25
TX25 screws (2)
[2.5 Nm]
Set the DC disconnector (1) to the I po-
sition
(4)
(4)
(4)
(4)
(4)
(4)
NOTE! If the screws no longer fit
tightly, they must be replaced with
new 5x25 TX25 screws
[42,0401,4231]
2
(3) (3)
NOTE! To avoid damaging the
base shell, do not angle the invert-
er by more than 11°.
3
4
5
(1) (2) (2)
6
7