Froling Turbomat TM 400, Installation Instructions Manual

Page: 2 / 69

Table of contents
1 General 4
2 Safety 5
2.1 Hazard levels of warnings 5
2.2 Qualification of assembly staff 6
2.3 Protective equipment for assembly staff 6
2.4 Design Information 6
2.4.1 Notes on standards 6
General standards for heating systems
6
Standards for structural and safety devices
7
Standards for heating water
7
Standards for permitted fuels
7
2.4.2 Installation and approval of the heating system 7
2.4.3 General information for installation room (boiler room) 8
2.4.4 Requirements for central heating water 8
2.4.5 Notes for using pressure maintenance systems 9
2.4.6 Return lift 10
2.4.7 Use with storage tank 10
2.4.8 Chimney connection/chimney system 11
Draught limiter
11
Boiler data for planning the flue gas system
11
3 Technology 12
3.1 Dimensions 12
3.2 Components and connections 13
3.3 Technical specifications 14
4 Assembly 16
4.1 Transport 16
4.2 Positioning 16
4.3 Temporary storage 16
4.4 Setting up in the boiler room 16
4.4.1 Moving the boiler in the boiler room 16
4.4.2 Minimum distances in the boiler room 17
4.5 Installing the boiler 18
4.5.1 General information 18
4.5.2 Bolting together the combustion chamber and heat exchanger 18
4.5.3 Assembling the stoker unit 20
4.5.4 Repositioning the EOS rods (if required) 21
4.5.5 Assemble the case cooling duct (optional) 21
4.5.6 Assembling the insulation floor base frame 23
4.5.7 Fitting thermal insulation to the boiler 26
4.5.8 Assembling the upper insulation base frame 28
4.5.9 Installing the insulating side panels 31
4.5.10 Installing the heat exchanger ash removal unit 35
4.5.11 Installing the induced draught fan 39
4.5.12 Assembling the FGR (optional) 41
4.5.13 Mounting the cover on the slide-on duct 43
Table of contents
2 Fröling GesmbH | 4710 Grieskirchen, Industriestraße 12 | www.froeling.at