6 | Assembly
40
M2250322_en | Installation instructions Wood chip boiler T4e 200-350
r
Use a threaded connector to seal the line regulating valve
Ä
Pay attention to direction of flow (A)!
r
Remove the punch out perforations on the back panel and install the back panel
Ä
Remove the burrs using a half-round file
6.3.5 Control the return temperature control (T4e 200-250)
r
Remove the rear cover plate on the return as well as the cover plate underneath
r
Tighten all of the screw connections on the return temperature control using a pipe
wrench
Ä
Screw connections may have loosened during transport.
Ä
IMPORTANT:
Before and after filling the system with heated water, check the seal
of the screw connections on the return temperature control
