Transport and storage | 5
M2250322_en | Installation instructions Wood chip boiler T4e 200-350
31
r
Hang the crane hook on the two eye bolts in the flue gas collection chamber and on
the heat exchanger and bring in the boiler
Ä
It is only possible to transport the boiler straight in by using all four eye bolts
5.4 Dismantling for location where positioning is difficult
If there is not enough room to bring in the pre-assembled boiler, certain components can
be dismantled.
NOTICE! Only take those steps absolutely necessary to bring in the boiler.
2x
r
Remove the insulated cover above the heat exchanger
Ä
T4e 200-250: two insulated covers
Ä
T4e 300-350: three insulated covers
r
Undo both screws and remove controller cover
