Installation | 5
M2050222_en | Installation instructions Lambdamat LM 1500 KOM
43
5.6.18 Fitting the automatic ignition (optional)
The automatic ignition is fitted to the left or right-hand side of the boiler, therefore,
perform the following steps on both sides.
r
Remove the blanking plate (1).
r
Screw in the igniter tube (2) and seal.
r
Place the double wire hose clip (3) on the igniter tube (2).
r
Insert the ignition fan (4) into the igniter tube (2) and secure using the double wire
hose clip (3).
r
Fit the covers above and below the ignition fan.
5.6.19 Fitting an additional ignition for hydraulic stoker unit (optional)
An additional ignition can be fitted to the back of the boiler if a hydraulic stoker unit is
being used.
r
Remove the blanking plug.
r
Insert the igniter tube.
r
Place the double screw clip onto the igniter tube.
r
Insert the ignition fan into the igniter tube and fix in place using the double screw clip.